,

320S

320S High Performance Batch Weighing Controller adalah pengendali penimbangan takar berkinerja tinggi yang dilengkapi layar LED 6 digit (21mm), kecepatan konversi A/D hingga 360 kali/detik, serta port komunikasi terintegrasi untuk kebutuhan industri.

Categories: ,

320S – High Performance Batch Weighing Controller

320S dirancang khusus untuk mengoptimalkan sistem penimbangan industri modern yang membutuhkan kecepatan respons tinggi, akurasi stabil, dan kemudahan integrasi jaringan. Dilengkapi dukungan protokol komunikasi modern serta kemudahan konfigurasi langsung melalui web browser, perangkat ini memberikan solusi kontrol penimbangan yang andal untuk berbagai lini produksi pabrik.

Product Information

Configuration Specification
Load cell excitation

DC 5V ±5%, 120 mA (Will power 8×350Ω lode cells)

Max. load cell input voltage

0 ~ 4.0 mV/V

Input sensitivity

0.35 uV/D

A/D resolution

360 times/ second

Display

6 digits red or green LED, 21mm 7-segment

Decimal point position

Selectable 0, 0.0, 0.00, 0.000

Display frequency

Optional: unlimited/20/10/5/1 times/second

Number of digits

-199999 to 999999

Minor division

1, 2, 5, 10, 20, 50

Status display

Zero, MD, Gross, Net, Accu.V, Accu.C, SP1, SP2, SP3, Hi, OK, Lo, Under, Over, Unloading, Running, Hold

Button

ON/OFF, Zero, Tare, F1, F, Enter

Power source voltage

AC 90 ~ 240V 50 / 60Hz

Power consumption

About 10 VA

Operating temperature

0℃ ~ 40℃

Operating humidity

< 85% RH

Safety regulations

EN 61010-1:2010/A1 (Low Voltage Directive), EN61326-1 (EMC Directive) Industrial Environment

Optional interfaces OP-01: RS-422 / RS-485 / RS-232 serial interface; OP-02-1: BCD Parallel output interface (Open Collector); OP-02-2: BCD parallel output interface (TTL); OP-03: Analog output interface (4 ~ 20mA, 0 ~ 10V); OP-04: Control I/O (4 In / 4 Out) + Setpoint Input (BCD Code); OP-04E: Relay Output (4 In / 4 Out); OP-04C: Hi, Lo input interface; OP-04F: Setpoint input interface; OP-05: Control I/O (8 In / 8 Out); OP-05E: Relay Output (8 In / 8 Out)

Fitur

  • Large 6-digit LED Display (21mm height)

  • Highspeed A/D Conversion of 360 times/second

  • Built-in RS-232 and RS-485 Interfaces

  • Support Modbus over TCP/IP and Modbus RTU over TCP/IP

  • External USB Data Log

  • Easy Setting and Update Via Web Browser

  • EN 61010-1:2010/A1 and EN61326-1 Industrial Environment

Aplikasi penggunaan

  • Sistem penimbangan takar otomatis (batch weighing system) di lingkungan industri.

  • Integrasi sistem kontrol penimbangan dengan perangkat jaringan menggunakan dukungan Modbus over TCP/IP dan antarmuka serial RS-232/RS-485.

  • Pencatatan data penimbangan operasional secara eksternal melalui USB data log.

Scroll to Top